Advertisement
IMPORTANT After control unit power
disconnection (battery replacement or dis-
connection and replacement of power win-
dow control unit protection fuses), the pow-
er window automatism shall be restored.
Proceed as follows with doors closed:
1. open the driver's window completely
keeping the button pressed for at least
3 seconds after window opening (window
lower stop);
2. close the driver's window completely
keeping the button pressed for at least
3 seconds after window closing (window up-
per stop);
3. repeat the same procedure (point 1 and
2) also for the front passenger's window;
4. check for proper initialisation by oper-
ating the windows automatically.
26
SEAT BELTS
USING THE SEAT BELTS
The belt should be worn keeping the
chest straight and rested against the seat
back.
To fasten the seat belts: hold the
tongue (A-fig. 35) and insert it into the
buckle (B), until hearing the locking click.
At removal, if it jams, let it rewind for a
short stretch, then pull it out again without
jerking.
fig. 35
To unfasten the seat belts: press
button (C-fig. 35). Guide the seat belt
with your hand while it is rewinding, to
prevent it from twisting. Through the reel,
the belt automatically adapts to the body
of the passenger wearing it, allowing free-
dom of movement.
When the car is parked on a steep slope
the reel mechanism may block; this is nor-
mal. The reel mechanism prevents the
webbing coming out when it is jerked or if
the car brakes sharply, in a collision or
when cornering at high speed.
A0A0045b
Never press button (C)
when travelling.
Advertisement
