Advertisement
LIGHT RHEOSTAT (fig. 79-80)
This function makes it possible to adjust
the lighting (dimming/increasing) of the
instrument cluster, odometer display (total
and trip meter, headlamp aiming device
display) of the clock/outside temperature
display and of the radio display.
To obtain the required lighting adjust-
â
ã
ment use button
or
standard display is on (clock + outside
temperature).
Partial lighting
ã
Keeping the
button pressed (on the
plate at the side of the steering column)
for more than 4 seconds the instrument
cluster lighting is turned off with the excep-
tion of the speedometer.
â
Keeping the
button pressed (on the
buzzer deactivated display (
)
OFF
fig. 78
plate at the side of the steering column)
for more than 4 seconds the complete
instrument cluster lighting is turned on
again.
display with minimum brightness
when the
fig. 79
display with maximum brightness
A0A0014b
fig. 80
INERTIAL FUEL CUT-OFF
SWITCH ON DISPLAY (fig. 81)
The display shown appears automatical-
ly when the inertial fuel cut-off switch cuts
in, following a crash of a certain magni-
tude.
The switch shuts off the supply of fuel.
IMPORTANT See the description in
A0A0012b
the Controls paragraph under the Inertial
fuel cut-off switch.
inertial fuel cut-off switch on display
A0A0013b
fig. 81
A0A0007b
59
Advertisement
