Advertisement
COURTESY MIRROR
LIGHT (fig. 43-44)
To change the bulb, proceed as follows:
– Open the mirror cover (A).
– Remove the transparent cover (B) lev-
ering in the point shown by the arrow.
– Gently raise the bulb holder (C) from
its housing, remove the snap-fitted bulb
and change it.
234
fig. 43
– Put the bulb holder correctly (C) back
in its housing.
– Refit the transparent cover (B) insert-
ing it in its correct position firstly on one
end and then on the other until it clicks
into place.
A0A0179b
fig. 44
GLOVEBOX LIGHT (fig. 45-46)
To change the bulb, proceed as follows:
– Open the glovebox, then remove the
light unit (A) levering in the point shown
by the arrow.
– Open the protection (B) and change
the snap-fitted bulb.
– Close the protection (B) on the trans-
parent cover.
A0A0180b
fig. 45
A0A0181b
Advertisement
