Advertisement
SELESPEED
TRANSMISSION
(on request for versions/markets
where applicable)
IMPORTANT To be able to use the Se-
lespeed correctly, this chapter should be read
in full to understand the correct, permissible
operations to be carried out right from the
start.
This device comprises a conventional me-
chanical gearbox to which an electronical-
ly-operated electro-hydraulic device has been
added which automatically controls the
clutch and gear engagement.
The clutch pedal has been eliminated and
the vehicle moves off using only the accel-
erator pedal.
128
fig. 119
Gearshifting takes place through the con-
trol lever (A-fig. 119) which is of the
floating type with a "single central stable
position". Using the lever it is possible to re-
quest an increase/decrease of the gear ra-
tio engaged and/or reverse gear engage-
ment (R) or neutral (N).
There are also two buttons on the steering
wheel spokes (fig. 120) through which,
only with the car on the move (with speed
above 0.5 km/h), it is possible to shift gear
up or down.
A0A0697b
fig. 120
The gearbox can work in two operating
modes:
– the first is semiautomatic(then called
MANUAL), in which the driver directly re-
quests gearshifting through the lever on the
centre console or pressing the buttons at the
steering wheel;
– the second is automatic, called CITY
(mode selectable with the specific button
B-fig. 119, the CITY sign appears on the
display fig. 121), in which the system de-
cides directly when to shift gear.
A0A0669b
Advertisement
