Advertisement
DRIVER'S SEAT LUMBAR
ADJUSTMENT (fig. 12)
Turn the knob (D) until obtaining the
most comfortable position.
DRIVER'S SEAT HEIGHT
ADJUSTMENT (fig. 12)
To raise the seat, pull the lever (B)
upwards, then work the lever (up and
down) until reaching the required height,
then release it. To lower the seat, push the
lever (B) downwards, then work the lever
(up and down) until reaching the required
height.
IMPORTANT Adjustment must be car-
ried out only seated in the driver's seat.
TILTING THE BACK REST
(fig. 12)
To gain access to the rear seats, pull the
handle (E), the back rest folds and the
seat is free to run forwards.
A recovery mechanism with memory
makes it possible to take the seat back to
its previous position.
Once the seat back has been returned to
the travelling condition, make sure that it
is correctly clamped, checking that the
"red band" on the upper part of the han-
dle (E) is concealed. In fact, this "red
band" indicates that the seat back is not
clamped.
Also check that the seat is firmly locked
on the runners, trying to move it to and
from.
BACK REST ANGLE ADJUST-
MENT (fig. 12)
Turn the knob(C) until reaching the posi-
tion required.
CENTRAL ARMREST (fig. 13
The armrest, fitted on some versions, is
adjustable and can be raised and lowered
to the required position.
To adjust, slightly raise the armrest, then
press the the release device (A).
Inside the armrest there is an oddments
compartment, to use it, raise the cover,
pressing the device (B).
fig. 13
)
A0A0023b
17
Advertisement
