Advertisement
CLR function (clearing CD track
storage)
With the CLR function it is possible to clear
one or all the CD tracks stored with the TPM
function.
To clear only one track from storage, se-
lect it using button "▲" (6) or "▼" (8)
when the TPM function is on, then press the
preset button 2 (16) for about 2 seconds;
the TPM function is turned off, a beep is
heard and the display shows "TR CLR".
To clear all the tracks of the CD selected
from storage, turn on the TPM function, then
press the preset button 2 (16) for about
4 seconds; the TPM function is turned off, a
double beep is heard after about 2 and 4
seconds and the display shows "CD CLR".
CD-CHANGER
(Compact Disc Player)
The CD-CHANGER (where fitted) is on the
left wall of the luggage compartment.
To gain access to it open the lid (A-
fig. 156) and then move the lid in the
shown direction (B-fig. 157).
Selecting the CD-CHANGER
To turn on the CD-Changer, turn on the set,
then press briefly and repeatedly the "SRC"
button (14) to select the "CHANGER"
function.
When listening to a Compact Disc for the
first time after putting it in the CD loader,
playing starts from the first track on the first
disc available.
fig. 156
Possible error messages
If the CD selected is not available due to
lack of the loader or because the loader is
not inserted in the CD-Changer, the display
shows "CHANGER".
If the CD played is illegible the display
shows "CD-ERROR", the next CD will be
selected; if there are no other CDs or if they
are also illegible, the display will show the
wording "NO CD" until the sound source is
changed.
In the event of a fault to the CD-Changer
or difficulty in removing the loader, the dis-
play will show the wording "CD ERROR".
A0A0678b
fig. 157
A0A0679b
183
Advertisement
