Advertisement
HI function
(highest heating power - fig. 102)
This is turned on setting on the display a
temperature above 32,5°C, and can be ac-
tivated independently from the driver's or
passenger's side or both; this setting brings
the system to the "monozone" mode and
is shown on both displays.
This function can be engaged when re-
quiring to heat the passenger compartment
as quickly as possible, exploiting the maxi-
mum potential of the system.
This function uses the maximum temper-
ature of the coolant fluid, while air distribu-
tion and fan speed are controlled according
to the system settings.
This function is unadvisable with
the engine cold to prevent admit-
ting air that is not warm enough to
the passenger compartment.
All manual settings are possible with this
function on.
To switch the system off, simply turn the
ring of knob (2) or (6) of the temperature
set to a value below 32,5°C; the opposite
display will show 32,5°C.
fig. 102
Pressing key (13)
the display will
AUTO
show a temperature of 32,5°C and returns
to an operating condition with automatic tem-
perature adjustment.
A0A0218b
113
Advertisement
