Advertisement
Soft Mute function
When the Mute function is turned on or
off, the volume lowers or increases gradu-
ally (Soft Mute function). The Soft Mute
function is also activated when one of the
six presetting buttons, the"BN" button
(13) or "ON" button (20) is pressed.
Tone adjustment
Proceed as follows:
– briefly and repeatedly press the "AUD"
button (18) until the display shows the
wording "BASS" or "TREBLE" (Bass or
Treble select function)
– press "▲" (6) to increase the basses
or trebles or "▼" (8) to lower them.
Pressing the buttons briefly, the change
is gradual by steps. Pressing them longer,
the change is fast.
For a few seconds the display shows the
levels of the basses/trebles (from -6 to +6).
After about 5 seconds from the last ad-
justment the display returns to the main ra-
dio screen.
Balance adjustment
Proceed as follows:
– briefly and repeatedly press the "AUD"
button (18) until the display shows the
wording "BALANCE" (Balance function
select)
– press "▲" (6) to increase the sound
from the right speakers or "▼" (8) to in-
crease the sound from the left speakers.
Pressing the buttons briefly, the change
is gradual by steps. Pressing them longer,
the change is fast. For a few seconds the
display shows the balancing levels from R+9
to L+9 ("R" = right, "L" = left). After
about 5 seconds from the last adjustment,
the display returns to the main radio screen.
Fader adjustment
Proceed as follows:
– briefly and repeatedly press the "AUD"
button (18) until the display shows the
wording "FADER" (Fader select function)
– press "▲" (6) to increase the sound
from the rear speakers "▼" (8) to increase
the sound from the front speakers.
Pressing the buttons briefly the change is
gradual by steps. Pressing them longer, the
change is fast. For a few seconds the dis-
play shows the fader levels from R+9 to
F+9 ("R" = rear, "F" = front).
After about 5 seconds from the last ad-
justment the display returns to the main ra-
dio screen.
Loudness function
(excluding versions with HI-FI BOSE
sound system)
The Loudness function improves the sound
volume when listening at low level, in-
creasing the basses and trebles. It is cut off
when the volume is set to maximum. To
switch the function on/off keep the "AUD"
(button 18) pressed until hearing the
"beep". The function condition (on or off)
is shown on the display for a few seconds
by "LOUD ON" or "LOUD OFF".
On versions with BOSE HI-FI sound, the
Loudness function is activated automatical-
ly by the amplifier.
167
Advertisement
