Advertisement
DIGITAL MULTIFUNCTION DISPLAY (where fitted)
The digital multifunction display shows the following: clock, outside temperature, buzzer setting (buzzer on/off), rheostat (light adjust-
ment), condition of the inertial fuel cut-off switch (FPS on).
CONTROL BUTTONS (fig. 75)
To make use of the information the digital display (with the ignition key at MAR) is able to give, you should firstly familiarise with the
control buttons on the plate at the side of the steering column, using them as described in the following paragraphs. Before doing anything
at all, you are advised to read this chapter in full.
fig. 75
A0A0022b
To increase the value displayed
Press for less than 1 second (pulse), indicated with
descriptions, to access the various adjustments
Press for more than 2 seconds, indicated with
tions, to confirm the choice required and return to the previous display
To decrease the value displayed
IMPORTANT When the standard display is on (clock + outside temperatured), pressing
â
ã
or
the lighting adjustment rheostat is turned on.
Q
in the following
R
in the following descrip-
57
Advertisement
