Advertisement
FRONT SEAT BELT HEIGHT
ADJUSTMENT
Always adjust the height of the belts
adapting it to the person who is wearing
it. This precaution improves their effective-
ness substantially reducing the risk of
injury in the event of a crash.
Correct adjustment is obtained when the
belt passes half way between the end of
the shoulder and the neck.
The front seat belt ring can take 4 dif-
ferent positions which make it possible to
adjust the height of the belts.
To adjust, press button (A-fig. 36) and
lower or raise the grip (B).
fig. 36
Always adjust the seat
belt height when the vehi-
cle is stationary.
After adjustment, always
check that the slider is an-
chored in one of the posi-
tions provided. To do this, with the
button (A) released, exert a fur-
ther pressure to allow the anchor
device to catch if release did not
take place at one of the preset po-
sitions.
A0A0685b
Rear belts
To fasten the belt: gently pull the belt
from its reel and guide the tape to prevent
it from twisting, then insert the tongue
(A-fig. 37) into the buckle housing
(B).
To unfasten the belt: press button (E).
fig. 37
A0A0686b
27
Advertisement
