Advertisement
HEADLIGHT AIMING DEVICE
(fig. 116)
The headlights should be aimed correctly
depending on the vehicle load.
To do this, use the rocker button (A), on
the plate at the side of the steering column:
– press the arrow on the button (A), to
increase by one position (e.g.: 0 ➟ 1 ➟ 2 ➟
3);
– press the arrow on the button (S), to lower
by one position (e.g.: 3 ➟ 2 ➟ 1 ➟ 0);
The display (B) in the tachometer shows the
positions during adjustment.
126
fig. 116 versions without Xenon headlights
For correct adjustment, bear in mind the
following conditions:
– position 0: one or two people occupy-
ing the the front seats
– position 1: five people;
– position 2: five people + load in the
boot;
– position 3: driver + maximum permis-
sible load all stowed in lug-
gage compartment
Adjust the beams every
time
the
changes.
A0A0093b
fig. 116a versions with Xenon headlights
The adjustment of Xenon headlights is au-
tomatic, therefore the versions fitted with
this optional lack the headlight aiming de-
vice (fig. 116a).
HAND BRAKE (fig. 117)
The hand brake lever is located between
the two front seats.
To operate the brake when the vehicle is
stationary, pull lever (A) upwards, until the
required braking action is obtained.
When the ignition key is at MAR, the
warning light on the instrument cluster x
will come on.
load
carried
A0A0677b
fig. 117
A0A0620b
Advertisement
