Advertisement
Display information
When the CD-Changer is working, the dis-
play shows the following information which
means:
"T05": shows the number of the track on
the CD
"03:42": shows the time elapsed since
the start of the track (if the corresponding
Menu function is on)
"CD 04": shows the number of the CD
in the loader.
Chosing the CD
Press "¯¯" (4) to select the previous CD
and "˙˙" (7) to select the next CD. If in
the menu the CD time display function was
selected, this will be replaced for about 2
seconds by the CD number.
If the loader does not contain a disc in the
position selected, the display briefly shows
the wording "NO CD", and the next disc
is played automatically.
184
Select track (forward/backward)
Briefly press "▲" (6) to play the next
track of the CD chosen and "▼" (8) to play
the previous track.
To select tracks continuously, keep the but-
ton pressed.
If playing the track started more than 3
seconds ago, pressing "▼" (8) the track is
played again from the start. In this case if
wanting to play the previous track, press the
button twice consecutively.
Fast forward/backward
Keep "˙˙" (7) pressed to move the track
selected forward at high speed and keep
"¯¯" (4) pressed to move it quickly back-
ward. Fast forward/backward is interrupt-
ed once the button is released.
A brief press on the button moves the track
forward or backward by 1 second.
If the CD number display function was se-
lected in the menu, this will be replaced for
about 2 seconds by the CD time display func-
tion.
Scanning CD tracks
(Scan function)
With this function it is possible to listen to
all the tracks contained on the CD selected.
Keep the "SRC" (button 14) pressed for
more than one second to play the first 10
seconds of every track on the CD. While
playing, the display will alternately show for
about 2 seconds the CD function chosen (CD
name, time or number) and the word
"SCAN". If the Scan function is on, the Re-
peat and Mix functions are turned off.
The scanning sequence is the following:
– from the track played up to the last of
the tracks on the CD
– change of CD and scanning all the tracks
(and so on for all the CDs in the changer)
– from the first track up to the one played
until the start of scanning.
The Scan function is interrupted in the fol-
lowing cases:
– turning the set off
– pressing the "SRC" button (14) again
to continue listening to the track that was
being played
– pressing "▲" (6) or "▼" (8) (press-
ing them together the track will be skipped)
Advertisement
