Spray Jets; Headlight Washers(Optional For Versions/Markets Where Applicable); Bodywork; Protection From Atmospheric Agents - Alfa Romeo 156 Owner's Manual

SPRAY JETS

Make sure that the windscreen and head-
light (where applicable) washer jets deliv-
er a jet of fluid which is adequate and cor-
rectly directed.
If the spray devices are not working check
that the supply circuit is not blocked. If nec-
essary unblock the nozzles using a needle.
274
HEADLIGHT WASHERS
(optional for versions/markets
where applicable)
Regularly check that the spray jets are in-
tact and clean fig. 28.
If it is necessary to direct the jet, contact
an Alfa Romeo Authorized Service.
fig. 28

BODYWORK

PROTECTION FROM
ATMOSPHERIC AGENTS
The main causes of corrosion are:
– atmospheric pollution
– salty air and humidity (coastal areas, or
hot humid climates)
– seasonal environment conditions.
Not to be underestimated is also the abra-
sive action of wind-borne atmospheric dust
and sand and mud and gravel raised by oth-
er vehicles.
On your Alfa 156, Alfa Romeo has
implemented the best manufacturing tech-
nologies to effectively protect the bodywork
against corrosion.
These include:
A0B0581m
– Painting products and systems which
give the car particular resistance to corrosion
and abrasion.
– Use of galvanised (or pretreated) steel
sheets, with high resistance to corrosion.
– Spraying the underbody, engine com-
partment, wheel arches and other parts with
highly protective wax products.