HEADLIGHT WASHERS
Regularly check that the spray jets are in-
tact and clean (fig. 22).
If it is necessary to direct the jet, contact
an Alfa Romeo Authorised Service.
254
fig. 22
BODYWORK
PROTECTION FROM
ATMOSPHERIC AGENTS
The main causes of corrosion are:
– atmospheric pollution
– salty air and humidity (coastal areas, or
hot humid climates)
– seasonal environment conditions.
Not to be underestimated is also the abra-
sive action of wind-borne atmospheric dust
and sand and mud and gravel raised by oth-
er cars.
On your Alfa 147, Alfa Romeo has
implemented the best manufacturing tech-
nologies to effectively protect the bodywork
against corrosion.
A0A1013m
These include:
– Painting products and systems which
give the car particular resistance to corrosion
and abrasion.
– Use of galvanised (or pretreated) steel
sheets, with high resistance to corrosion.
– Spraying of the underbody, engine com-
partment, wheel arches and other parts with
highly protective wax products.
– Spraying of plastic parts, with a protec-
tive function, in the more exposed points:
underdoor, inner wheel arch linings, etc.
– Use of "open" boxed sections to pre-
vent condensation and pockets of moisture
from triggering rust inside.
CAR EXTERIOR AND
UNDERBODY WARRANTY
The Alfa 147 is guaranteed against
perforation due to rust of any original ele-
ment of the structure or body. For the gen-
eral terms of this warranty, refer to the War-
ranty booklet.