Advertisement
TELEPHONE PROVISION
(fig. 154)
If the voice kit is installed on the car, when
a phone call is received the radio sound is
connected to the phone input. The telephone
sound is heard with a fixed volume, but it
can be adjusted during the conversation us-
ing "VOL+" (21) to higher the volume or
"VOL-" (19) to lower it.
The fixed telephone volume can be ad-
justed through the "PHONE" function of
the menu (see "MENU" paragraph).
168
The only buttons active during phone calls
are:
– "VOL+" (21), "VOL-" (19): for
volume adjustment
– "ON" (20): turning the radio on/off
– "AF-TA" (1): traffic information.
While the sound is off for a phone call, the
display shows the word "PHONE".
The sound of the phone call will be inter-
rupted in the case of transmission of a traf-
fic bulletin or a PTY31 announcement; if
wishing to interrupt the bulletin press the
"AF-TA" button (1).
RADIO (fig. 154)
When the set is turned on the last function
selected before turning off is played (Radio,
Compact Disc or CD-Changer).
To select the Radio function while listening
to a Compact Disc, briefly and repeatedly
press the "SRC" button (14) until this
function is selected.
Selecting the frequency
band
If in the Radio mode, briefly and repeat-
edly press the "BN" button (13) to select
the required reception band.
Every time the button is pressed the fol-
lowing bands are selected in sequence
"FM1", "FM2", "FMT", "MW" and
"LW" shown by the respective wording on
the display.
The FM band is divided into section: FM1,
FM2 and FMT.
The FMT reception band is reserved to the
stations stored automatically with the Au-
tostore function.
The radio is always ready to receive sta-
tions in the RDS Mode (Radio Data System).
Advertisement
