Download Print this page

Alfa Romeo Alfa GT Owner's Manual page 181

Hide thumbs Also See for Alfa GT:

Advertisement

To clear all the names, turn the function
on and keep the "MENU" (9) button
pressed for about 4 seconds. The set gives
two beeps and the display shows "ALL
CLR" for about 2 seconds. At this point it
is possible to start the name allocation pro-
cedure.
Volume changing with speed
function (SVC) (excluding
versions with HI-FI BOSE sound
system)
The SVC function makes it possible to au-
tomatically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the noise
level inside the passenger compartment.
To turn the function on/off use "¯¯" (4)
or "˙˙" (7). The display will show the cur-
rent status of the function:
– "SVC-ON": function on
– "SVC-OFF": function off.
Tuner sensitivity
adjustment (SENS DX/LO)
With this function it is possible to change
the sensitivity of automatic station search-
ing. When low sensitivity is set "SENS-
LO" only stations with excellent reception
are sought, when high sensitivity is set
"SENS-DX" all stations are sought. There-
fore, if the car is in an area with a consid-
erable number of stations and you want to
choose only those with a strong signal, set
to low sensitivity "SENS-LO".
To set the sensitivity, use "¯¯" (4) or
"˙˙" (7). The display will show the cur-
rent status of the function:
– "SENS-LO": low sensitivity
– "SENS-DX": high sensitivity.
Compact Disc data display
function (CD)
With this function it is possible to choose
the information shown by the display, when
listening to a Compact Disc.
Two settings are available:
– TIME (time elapsed since the start of
the track)
– NAME (CD name).
After choosing "CD" in the Menu using
"▲" (6) or "▼" (8), the display shows
"CD-DISP". To change the setting use
"¯¯" (4) or "˙˙" (7).
CD-Changer data display
function(CDC)
(if installed)
This function can be chosen only if a CD-
Changer is connected. In this case the dis-
play will show "CDC-DISP".
To change function, use "¯¯" (4) or
"˙˙" (7).
The display shows the setting among the
two possible: "TIME" and "CD-NR".
179

Advertisement

loading