Advertisement
– Close the protective cover (B).
– Refit the light unit pressing gently in
correspondence with the retainer catches,
until hearing the click.
fig. 40
REAR ROOF LIGHT
(fig. 41-42)
To change the bulb, proceed as follows:
– Remove the light unit (A) levering in
the point shown by the arrow.
– Replace the bulb releasing it from the
side contacts making sure that the new
bulb is correctly clamped between the con-
tacts.
A0A0176b
fig. 41
– Refit the light unit in the correct posi-
tion inserting first the side with the con-
nector, then pressing the other side until
the catch clicks into place (B).
A0A0177b
fig. 42
A0A0178b
233
Advertisement
