Accessing Local Administrative Procedures - Avaya 4600 Series Installation Manual

Accessing Local Administrative Procedures

During Telephone Startup:
For 4600 Series IP Telephones with a display, as of Release 2.9 you can invoke the manual
addressing procedure (ADDR) during initialization whenever this message displays:
* to program
or at any other time the initialization process can support a processing interrupt. However,
PROCSTAT must be zero and PROCPSWD null to invoke local administrative procedure
access.
Note:
The "* to program" message is supported when the messages "Address
Note:
conflict," "Subnet conflict," "Bad router?" and "Bad FileSv
address" display. Allowing local administrative procedure access in response to
these messages prevents situations in which input is required but not allowed.
!
Important:
The factory-set default local administrative procedure Access Code
Important:
(PROCPSWD) is 27238.
1. During startup, invoke the manual addressing procedure by pressing * when the prompt *
to program displays.
During Normal Telephone Operation (all 4600 IP Telephones except the 4601):
1. Invoke all local procedures by pressing the Hold or Mute button, up to 7 numeric dial pad
buttons that signify the desired procedure, and the # button. The 4630/4630SW IP
Telephones and the 4690 IP Conference Telephone do not have a dedicated Hold button.
On these phones, you must use the Mute button to access these options.
A 6-second timeout is in effect between button presses after pressing the Hold button. If
you do not press a valid button within 6 seconds of pressing the previous button, the
collected digits are discarded. In this case, no administrative option is invoked.
During Normal Telephone Operation (4601 IP Telephone only):
1. Invoke all local procedures by pressing the Hold button, up to 7 numeric dial pad buttons
that signify the desired procedure, and the # button.
A 6-second timeout is in effect between button presses after pressing the Hold button. If
you do not press a valid button within 6 seconds of pressing the previous button, the
collected digits are discarded. In this case, no administrative option is invoked.
Accessing Local Administrative Procedures
Issue 7 July 2008 49