Accessing Local (Craft) Procedures - Avaya one-X 9601 Installation And Maintenance Manual

Local Administrative Options

Accessing Local (Craft) Procedures

Note:
Local procedures can only be invoked when the local (dialpad) procedure status
Note:
system value (PROCSTAT) is "0", giving full access to local procedures.
Note:
The factory-set default Craft Access Code is 27238.
Note:
During Deskphone Startup:
1. During startup, invoke local procedures by pressing Program to display the Craft Access
Command Entry screen:
Startup interrupted
Enter command
2. Press Mute and enter the local dialpad procedure password (0 to 7 numeric digits), as
specified by the system administrator in the system value PROCPSWD. For security
purposes, the deskphone displays an asterisk for each numeric dialpad press. If you are
using a touchscreen deskphone, and need to backspace during password entry, use the
Contacts button; for non-touchscreen phones, use the left arrow button or the designated
softkey.
3. Press Enter (#) when password entry is complete.
The entry is compared to the PROCPSWD value. If they match, the deskphone displays the
Admin Procedures screen, with the prompt "Select procedure and press Start."
4. For all non-touchscreen phones, use the navigation arrows to scroll to and highlight the
local procedure you want, then press Select or OK. Or scroll to the procedure you want and
press the corresponding line button. For touchscreen phones, scroll to the local procedure
you want if it not already displayed then touch the line on which the local procedure you
want appears.
During Normal Deskphone Operation:
1. Invoke all local procedures by pressing the Mute button, entering the local (dialpad)
procedure password (0 to 7 numeric digits), then pressing the # button. If you are using a
touchscreen phone and need to backspace during password entry, use the Contacts button;
for non-touchscreen phones, use the left arrow button or the designated softkey.
A 6-second timeout is in effect between button presses after pressing the Mute button. If
you do not press a valid button within 6 seconds of pressing the previous button, the
collected digits are discarded. In this case, no administrative option is invoked.
The entry is compared to the PROCPSWD value. If they match, the deskphone displays the
Admin Procedures screen, and prompts "Select procedure and press Start."
28 SIP Deskphones Release 6.1 Installation and Maintenance Guide