Accessing The Local Or The Craft Procedures - Avaya 9601 Installing And Maintaining

Local administrative options

Accessing the local or the Craft procedures

The Local or the Craft procedures can only be invoked if the value of the PROCSTAT parameter
in the settings file is set to 0. Setting the PROCSTAT parameter to 0 provides full access to the
local procedures.
Note:
The default password to gain access to the local procedures menu is set in
Note:
PROCPSWD parameter. The factory-set default password is 27238. You must
not change the default value at the time of initial installation.
During deskphone startup:
1. During startup, invoke local procedures by pressing Program to display the Craft Access
Command Entry screen.
2. Enter the local dialpad procedure password (0 to 7 numeric digits), as specified by the
system administrator in the PROCPSWD parameter.
3. Press the Enter softkey.
4. For all non-touchscreen phones, use the navigation arrows to scroll to and highlight the
local procedure you want, then press Select or OK. Or scroll to the procedure you want and
press the corresponding line button. For touchscreen phones, scroll to the local procedure
you want if it not already displayed then touch the line on which the local procedure you
want appears.
Note:
The phone restarts after exiting the craft menu.
Note:
During normal deskphone operation:
1. Invoke all local procedures by pressing Mute, entering the local (dialpad) procedure
password (0 to 7 numeric digits), then pressing #.
A 6-second timeout is in effect between button presses after pressing Mute. If you do not
press a valid button within 6 seconds of pressing the previous button, the collected digits
are discarded. In this case, no administrative option is invoked.
2. For non-touchscreen phones, use the navigation arrows to scroll to and highlight the local
procedure you want, then press Select or OK. Or scroll to the procedure you want and
press the corresponding line button. For touchscreen phones, scroll to the local procedure
you want if it not already displayed then touch the line on which the local procedure you
want appears.
42 SIP Deskphones Release 6.4 Installation and Maintenance Guide