Tig Lift; Special Functions Menu (Set Up Fx) - CEA DIGITECH vision PULSE 3200 Operator's Manual

TIG LIFT

Select the TIG LIFT welding process by using the MENU

1 - SPECIAL FUNCTIONS Menu (SET UP Fx)

To access the SPECIAL FUNCTIONS Menu (SET UP Fx) push the MENU K
ENCODER K
MENU K
EY
ENCODER K - SX
NOB
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
To access the SPECIAL FUNCTIONS Menu (SET UP Fx) push the SPECIAL FUNCTIONS (F
PARAMETER DISPLAY S
PARAMETER DISPLAY S
CREEN
ENCODER K - A
NOB
PARAMETER DISPLAY S
CREEN
ENCODER K - V
NOB
SPECIAL FUNCTIONS (F ) K
X EY
SPECIAL FUNCTIONS (F ) LED
X
"DH" / "VS" CONTROL PANEL
MENU K
EY
SX K
EY
- SX
NOB
Used to access subsequent menus if there are any.
Used to select the various SPECIAL FUNCTIONS (Fx).
Used to access the PRE-SETTING with the changes made to the SPECIAL FUNCTIONS
(Fx).
If held down for 2 seconds it makes it possible to return the value for the SPECIAL
FUNCTION (Fx) selected to the DEFAULT value.
Used to change the selected SPECIAL FUNCTION (Fx) value.
"HT5" CONTROL PANEL (not used with DH 32 and VS 32)
- A
CREEN
ENCODER K - A
NOB
- A Displays the selected SPECIAL FUNCTION (Fx).
Used to select the various SPECIAL FUNCTIONS (Fx).
- V
Displays the value for the selected SPECIAL FUNCTION (Fx).
Used to change the selected SPECIAL FUNCTION (Fx) value.
Only enables entering and exit afterwards from the SPECIAL FUNCTIONS Menu (SET UP
Fx) on the HT5 panel and not on the DH/VS panel.
The operator must press the SPECIAL FUNCTIONS (SET UP F
included in the SPECIAL FUNCTIONS Menu (SET UP Fx).
as explained on page 7.
KEY
.
EY
SLOPE UP 2.0 s
DEFAULT
23
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
) K .
X EY
PARAMETER DISPLAY S
CREEN
ENCODER K - V
NOB
SPECIAL FUNCTIONS (F ) K
X
SPECIAL FUNCTIONS (F ) LED
X
) K for it to light up and be
X EY
TIG LIFT
- V
EY