CEA DIGITECH vision PULSE 3200 Operator's Manual page 57

Use the DX K
SEQ 001 NAME Sequenza Saldatura
JOB PRG PROCESS SYN
ENCODER K
001 1011 MIG PULSE 100A
003 2011 MIG DUAL PULSE 100A
Push the ENTER/MEM K
--- --- --- ---
AVAILABLE JOBS: 5
001 1011 MIG PULSE 100A
002 7011 VISION.ULTRASPEED 124A
003 1011 MIG PULSE 100A
Use the ENCODER K
characters available is required, and to move to the position of the next or the previous character.
Once creation of the sequence has been completed, push the MENU K
SEQ NAME # JOB
001 Welding sequence 2
002 --- ---
003 --- ---
As you can see, the sequence number is shown on the left, the name of the sequence in the centre,
004 --- ---
005 --- ---
and the total number of jobs used for the sequence on the right.
006 --- ---
Once the welding sequence has been created, the SX K
or the ENTER/MEM K
Select the sequence to be copied using the ENCODER K
SEQ NAME # JOB
001 Welding sequence 2
002 Welding sequence 1 4
003 --- ---
004 Welding sequence 2 4
005 --- ---
006 --- ---
The copy sequence 004 message displayed indicates that sequence 4 has been selected.
SEQ NAME # JOB
001 Welding sequence 2
002 Welding sequence 1 4
003 --- ---
004 Welding sequence 2 4
005 --- ---
006 --- ---
COPY SEQ. 004
Select the position of the sequence to be added, using the ENCODER K
6).
Until the DX K
SEQ NAME # JOB
002 Welding sequence 1 2
in all the positions it is required.
003 --- ---
004 Welding sequence 2 4
005 --- ---
006 --- ---
007 --- ---
COPY SEQ. 004
Push the ENTER/MEM K
SEQ NAME # JOB
002 Welding sequence 1 2
003 --- ---
004 Welding sequence 2 4
005 --- ---
006 Welding sequence 2 4
007 --- ---
COPY SEQ. 004
If the sequence position chosen is already in use, when the ENTER/MEM K
left is displayed.
Push the SX K
SEQ NAME # JOB
002 Welding sequence 1 2
everything.
003 --- ---
004 Welding sequence 2 4
005 --- ---
006 Welding sequence 2 4
007 --- ---
OVERWRITE SEQ. 006 WITH SEQ. 004?
Select the sequence to be deleted using the ENCODER K
SEQ NAME # JOB
001 Welding sequence 2
002 Welding sequence 1 4
003 --- ---
004 Welding sequence 2 4
005 --- ---
006 Welding sequence 2 4
to remove the JOB from the section of the sequence selected using the
EY
- SX.
NOB
to be able to edit the sequence name.
EY
- DX and the ENCODER K
NOB
to edit it.
EY
COPYING A SEQUENCE
is pushed of a new sequence is selected using the SX K
EY
to copy the sequence.
EY
and sequence4 6 will be replaced by sequence 4, whereas the DX K
EY
DELETING A SEQUENCE
38
- SX SX respectively to select the which of the
NOB
to save it.
EY
can be used to copy it, the DX K
EY
- SX and push the SX K
NOB
- SX (e.g. in this case, position
NOB
, sequence 004 can be added
EY
EY
- SX and push the SX K
NOB
to delete it,
EY
.
EY
is pushed the image to the
cancels
EY
.
EY
(continua)