Welding - CEA DIGITECH vision PULSE 3200 Operator's Manual

ENCODER K - A
NOB
PARAMETER DISPLAY S
CREEN
PARAMETER SELECTION LED - V

3 - WELDING

When welding takes place the fields in the displays show the same values as those included for pre-setting with the difference
that now they are those measured.
Adjust the value of the parameter WELDING CURRENT ( ).
Displays the value of the parameter WELDING VOLTAGE ( ).
- V
The WELDING VOLTAGE shown is the measured voltage.
The LED unit shows the WELDING VOLTAGE ( ) switched on.
"DH" / "VS" CONTROL PANEL
111 50.0
"HT5" CONTROL PANEL (not used with DH 32 and VS 32)
A V
25
TIG LIFT