Mma; Program Selection Menu (Program); Special Functions Menu (Set Up Fx) - CEA DIGITECH vision PULSE 3200 Operator's Manual

MMA

Select the MMA welding process by using the MENU

1 - PROGRAM SELECTION Menu (PROGRAM)

To access the PROGRAM SELECTION Menu (PROGRAM) push the MENU K
ENCODER K
MENU K
EY
ENCODER K - SX
NOB
ENTER/MEM K
EY
It is not possible to access the PROGRAM SELECTION Menu (PROGRAM) via the HT5 control panel.

2 - SPECIAL FUNCTIONS Menu (SET UP Fx)

To access the SPECIAL FUNCTIONS Menu (SET UP Fx) push the MENU K
ENCODER K
MENU K
EY
ENCODER K - SX
NOB
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
KEY
"DH" / "VS" CONTROL PANEL
MENU K
EY
- SX
NOB
Used to access subsequent menus if there are any.
Select the welding program.
Used to access PRE-SETTING of the program selected.
"HT5" CONTROL PANEL (not used with DH 32 and VS 32)
"DH" / "VS" CONTROL PANEL
MENU K
EY
- SX
NOB
Used to access subsequent menus if there are any.
Used to select the various SPECIAL FUNCTIONS (Fx).
Used to access the PRE-SETTING with the changes made to the SPECIAL FUNCTIONS
(Fx).
If held down for 2 seconds it makes it possible to return the value for the SPECIAL
FUNCTION (Fx) selected to the DEFAULT value.
Used to change the selected SPECIAL FUNCTION (Fx) value.
as explained on page 7.
.
EY
PRG TYPE
3100 MMA Basic
3200 MMA Cr Ni
3/3
3200 MMA Cr Ni
.
EY
HOT START 50
DEFAULT
3200 MMA Cr Ni
17
ENTER/MEM K
EY
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
MMA
MMA