Replacing Operation Panel - Horizon Fitness APC-61 Manual

4-20 Replacing Operation Panel

2
Upper Cover
3
1. Loosen 2 screws of 1 and remove lever.
2. Loosen 3 screws of 2 and remove upper
cover. (For T61, remove also lower cover
under this.)
3. Loosen 4 screws of 3 and remove front
cover by pulling to the operation side.
Lower Cover
6
1
3
5
4
4. Loosen screws 4 on front side of panel.
The upper screw of 4 has a washer. Do not
lose it.
In this condition, panel is wired with
connector at its back. Therefore, when
loosening the last screw, support the bottom
of the panel by hand.
5. Disconnect the connector at the back of
CPU Board
Display Board
6. Loosen 4 screws of 5 and remove panel.
7. Loosen screw 6 and remove the small
Panel
8. Fix panel unit with the opposite order and
9. Fix screws of 3 , 2 , and 1 .
(T61)
4-27
panel and remove panel unit.
board at the back (CPU board). Replace the
large board (display board).
check buttons on the panel operate correctly.