Replacing Limit Switch - Horizon Fitness APC-61 Manual

4-25 Replacing Limit Switch for Clamp Upper Limit Position
Control Box
Dock
Clamp Upper Limit Position
Limit Switch
1. Remove transparent table cover.
2. Remove rear covers A and B and pull up
control box so that clamp upper limit posi-
tion limit switch can be seen.
3. Check there is no sound when actuator
pointed by the arrow is turned to the right.
If there is sound, limit switch is not activated
though clamp is at the upper limit position.
Adjust the position of bracket and fix at the
position where limit switch is activated .
If there is no sound, go to the next proce-
dure.
Bracket
Dock
4. Remove bracket and replace limit switch.
Fix limit switch so that actuator is still
movable about 0.5mm after actuator is
pressed by dock and sounds.
Actuator
Clamp Upper Limit
Position Limit Switch
4-32