Replacing Belt (For Low Speed) - Horizon Fitness APC-61 Manual

4-15 Replacing Belt (For Low Speed)

Idle Pulley
Low Speed Belt
High Speed Belt
1. Remove encoder according to "4-11 Replac-
ing Encoder".
2. Remove bracket.
3. Loosen idle pulley and remove low speed
belt.
4. Replace belt with a new one.
5. Adjust so that the belt is bent between 3 and
4mm with idle pulley when applying the
load of 1 kgf to belt and fix. The movable
range of idle pulley will become larger if it it
is attached upside down.
Bracket
1kgf2 to 3mm
Idle Pulley
Low Speed Belt
1kgf3 to 4mm
4-22
6.Fix encoder unit.
7.Because encoder was once removed, adjust
the gap between actual cut size and indicated
size according to "Adjustment of Cut Size,
from 3-1 to 3-3".
8.Fix back covers A and B.