Replacing Knife Link A And B - Horizon Fitness APC-61 Manual

4-5 Replacing Knife Link A and B

WANING
During this operation, hydraulic pres-
sure is turned on and off. If operated
with wrong order, the machine will be
heavily damaged or severe personal
injury will result to operator. Read care-
fully to the last procedure and under-
stand the contents well before operation.
Reform the step 1 to 17 in Ò4-1 Replacing
Knife HolderÓ. Here the procedures after
removing knife holder and the knife link A, B
are shown.
1. Check there are bearings metals in the holes
of links A and B pointed by the arrow.
Link B
Link A
2. (This step is not necessary for link B. Go to
the next.)
Fix the hook to link A
Hook
Link A
3. Grease the gray parts in the drawing
and the holes of each link. (For both sides)
Next, follow from the step 19 in the Ò4-1
Replacing Knife HolderÓ.
4-10