Is Stepped On; Clamp Does Not Lower Though Foot Pedal Is Stepped On - Horizon Fitness APC-61 Manual

2-6 Clamp Does Not Lower Though Foot Pedal Is Stepped On.

Joint or rod has problem.
Upper or lower rod end is loose and detached
from rod. Or rod is broken.
In either case, because the stepping force on
foot pedal is not transmitted to clamp, that is
why clamp does not lower.
If rod is broken, replace it and adjust to the
right position according to Ò4-10 Replacing
RodÓ.
Rod End
For machines of S/N 010999 or below, the
drawing of rod is as follows.
Rod
Rod End
To replace it with the present one, not only
upper and lower rod ends and rod but also
hook on parts book Fig.3-30 (M013220-00)
need to be replaced together.
Stepping Position Detecting Micro switches
are out of order (For T-58.)
Foot Pedal
2-14
Micro Switch
Check 2 micro switches detecting the position
of foot pedal. If they do not turn on or off
though foot pedal is stepped on, check whether
cams are loose. If the switches do not turn on
or off though cams are not loose, micro
switches are out of order.
R L
Cam