Replacing Fuse And Resetting Thermal Relay - Horizon Fitness APC-61 Manual

4-22 Replacing Fuse and Resetting Thermal Relay

To replace fuse
Control Box
2
A
For Board
For High Speed Motor
For Low Speed Motor
1. Turn hydraulic pressure and power switch
off.
2. Remove cover of control box.
3. Replace blown fuse. Spare fuses are pro-
vided inside control box with a tape.
To reset thermal relay
2 5 5 5 5
A A A A A
1. Turn hydraulic pressure and power switch
off.
2. Remove cover of control box.
3. When tip bar is projecting, thermal relay is
operating. Press the reset button.
When reset button does not operate, the inner
temperature of thermal relay is too high. Wait
for a while and operate again.
Thermal Relay
Control P.C.B
Tip Bar
Reset Button
4-29