End Of Diagnosis - YASKAWA YWE-EH500-6N0 Instruction Manual

HW0480311
12.5 Clear of Error Record
To delete the number of welding source errors, perform the clear operation of the error record.
The following explain how to clear the error record.
V
PRM Select
Common PRM Select
Record
Press the buttons simultaneously.
(1) In the Diagnosis mode, press "L" button and "Record" button simultaneously to set
the welding source ready for clearing of error record ("Err CLr on" is displayed).
V
(2) Press "RECORD" button with "Err CLr on" displayed to clear the error record. To
cancel the operation for clearing the error record, press "L" button again.
12.6 End of Diagnosis Mode
To end the diagnosis mode, turn OFF the MOTOWELD-EH500 main power once, then start
up the welding source as normal without pressing any buttons.
• Welding cannot be performed in the Diagnosis mode. After diagnosing,
be sure to start up the welding source in the usual mode.
Wire m/min
A
Auto Adj.
PRM Set
Auto Adjustment
/Individual
L R
Gas
Fig. 21 Error Record Clear Mode
A Wire m/min
CAUTION
12-6
12.5 Clear of Error Record
Type
Power
Warning
Search
Weld, Type
File No.1
File No.2
File No.3
User File Select
Type
HW0480311
93/129