YASKAWA YWE-EH500-6N0 Instruction Manual page 30

2.9 Precautions on Transporting
Welding gloves
2.9
Precautions on Transporting
• Sling applications and crane or forklift operations must be performed by
authorized personnel only.
Failure to observe this caution may result in injury or damage.
• Avoid excessive vibration or shock while transporting.
The welding source consists of precision components. Failure to observe this caution
may affect its performance.
1. Transporting with Using Casters
When using the casters, move the welding source slowly so that it can be stopped
quickly at any time. Moving the welding source with casters quickly may result in an
accident due to inertia, and you cannot control the direction of movement.
Moreover, be sure to stop the welding source with casters at a step and move it slowly
to prevent any shock sudden. Do not move the welding source with casters up a slope,
stairs, etc.
Jacket must be
long-sleeved.
Fig. 8 Protection Example
CAUTION
2-13
Helmet
Handshield
Foot covers
Safety boots
HW0480311
HW0480311
30/129