List Of Common - YASKAWA YWE-EH500-6N0 Instruction Manual

HW0480311
4.4
List of Common Parameters
Common parameters (C parameters) specify the operations of the welding source. Set the
parameters according to the operation conditions.
Save the changed common parameters to enable common parameters. Then turn OFF the
power and ON again.
Display
Contents
No.
Gas check time
C00
Gas pre-flow time
C01
Gas after-flow time
C02
Low-pulse frequency (for weld-
C03
ing type 2.14, aluminum)
Low-pulse amplitude (for weld-
C04
ing type 2.14, aluminum)
Current at low-pulse accelera-
C05 tion (for welding type 2.14, alu-
minum)
Current at low-pulse decelera-
C06 tion (for welding type 2.14, alu-
minum)
Digital meter displayed speed
C07
External resistance set value
C08
Motor setting
C09
Reserved for system
C10
Reserved for system
C11
Reserved for system
C12
Current calibration reference
C13
current 1 (File 1)
Current calibration reference
C14
current 2 (File 1)
Current calibration reference
C15
current 1 (File 2)
Current calibration reference
C16
current 2 (File 2)
Current calibration reference
C17
current 1 (File 3)
4.4 List of Common Parameters
Default
Unit
Setting
−
20 s
Gas flowing time before welding
56 ms
output starts (minimum: 56 ms)
Gas flowing time after welding out-
500 ms
put completes
Low-pulse frequency
100 0.1Hz
Low-pulse wire feeding speed
20 %
amplitude
Current at low-pulse acceleration
120 %
Current at low-pulse deceleration
100 %
Time for average moving for dis-
1000 ms play of current/voltage digital
meter
Electric resistance value of weld-
×10 -
ing current path such as power
*1
505
Ω
5 cable, jig stand connected to weld-
ing source
Motor selection
0: Print-type servomotor (default
setting)
2 - 1: Minertia servomotor for servo
torch
2: 4-roller servomotor (YWE-
WF340MELC)
Do not change.
50
Do not change.
100
Do not change.
200
Reference current 1 for the user
150 A
file No.1
Reference current 2 for the user
250 A
file No.1
Reference current 1 for the user
150 A
file No.2
Reference current 2 for the user
250 A
file No.2
Reference current 1 for the user
150 A
file No.3
4-19
HW0480311
Description
53/129