YASKAWA YWE-EH500-6N0 Instruction Manual page 2

• This instruction manual is intended to explain operating instructions
and maintenance procedures primarily for the MOTOWELD-EH500. Read
this manual carefully and understand the contents before handling the
MOTOWELD-EH500. For the wire feeder, the welding torch, and the gas
regulator, read each instruction manual carefully.
• General items related to safety are listed in the Safety Manual Section
1: Safety. To ensure correct and safe operation, carefully read the Setup
Manual before reading this manual.
• Some drawings in this manual are shown with the protective covers or
shields removed for clarity. Be sure all covers and shields are replaced
before operating this product.
• The drawings and photos in this manual are representative examples
and differences may exist between them and the delivered product.
• YASKAWA may modify this model without notice when necessary due to
product improvements, modifications, or changes in specifications. If
such modification is made, the manual number will also be revised.
• If your copy of the manual is damaged or lost, contact a YASKAWA rep-
resentative to order a new copy. The representatives are listed on the
back cover. Be sure to tell the representative the manual number listed
on the front cover.
• YASKAWA is not responsible for incidents arising from unauthorized
modification of its products. Unauthorized modification voids your prod-
uct's warranty.
MANDATORY
CAUTION
ii
HW0480311
HW0480311
2/129