YASKAWA YWE-EH500-6N0 Instruction Manual page 51

HW0480311
Display
*1
No.
P21 - Reserved for system
to
P30
P31 P MAG/MIG pulse current increas-
ing speed
P32 - Reserved for system
P33 P MAG/MIG pulse current decreas-
ing speed
P34 - Reserved for system
P35 A Aluminum MIG pulse current
increasing ratio
P36 A Aluminum MIG pulse current
decreasing ratio
P37 S Short-circuit current increasing
speed 1
P38 S Short-circuit current decreasing
speed 2
P39 - Reserved for system
P40 - Reserved for system
P41 - Reserved for system
P42 - Reserved for system
P43 C Hot slope time
P44 C Ending slope time
P45 - Reserved for system
P46 - Reserved for system
P47 - Reserved for system
P48 - Reserved for system
P49 S Arc control 1
P50 S Arc control 2
P51 S Arc control 3
P52 - Reserved for system
to
P54
Items
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
Do not change.
4-17
4.3 List of Process Parameters
Description
HW0480311
51/129