Starting Up Welding Source In Diagnosis Mode - YASKAWA YWE-EH500-6N0 Instruction Manual

12.1 Starting up Welding Source in Diagnosis Mode

12 Diagnosis Function
MOTOWELD-EH500 has a Diagnosis mode to confirm the software version, the number of
occurrence of welding source error, and DIP switch set status.
12.1 Starting up Welding Source in Diagnosis Mode
To start up the welding source in the Diagnosis mode, turn OFF the main power of
MOTOWELD-EH500 once, and turn ON the main power again while pressing the "Record"
button.
The diagnosis information is displayed in the 7-segment LED indicators on the welding source
front panel once the Diagnosis mode is launched.
Common PRM Select
The set status of DIP switch is displayed in the 7-segment LED indicators when the Diagnosis
mode is launched.
Fig. 15 Panel at Launch of MOTOEWELD-EH500 Diagnosis Mode
V
A
Wire m/min
Auto Adj.
PRM Select
Auto Adjustment
/Individual
L
Gas
Record
ON
OFF
V
A Wire m/min
Auto Adj.
PRM Select
Auto Adjustment
Common PRM Select /Individual
L
Gas
Record
ON
OFF
12-1
Type
PRM Set
Weld, Type
File No.1
File No.2
R
File No.3
User File Select
Type
Power
Warning
Search
Weld, Type
PRM Set
File No.1
File No.2
R
File No.3
User File Select
HW0480311
HW0480311
Power
Warning
Search
88/129