8.5 Replace Fuse
8.5
Replace Fuse
If any fault shown below occurs,Check fuse.If Fuse blown again after replace fuse,Contact
your Yaskawa representative.
Item
Fuse 10A blown.(purple
color)
Fuse 5A blown.
To Replace
, Remove two screws at a control panel and open a control panel.
Fuse 5A
Table. 10 Fuse
• Although the start signal is ON or the wire inching signal is
ON,Motor does not operate.
• Cooling fan does not rotate.
• Although power switch is ON,the Digital Meter does not dis-
play.
8-4
Fault
HW0480311
HW0480311
72/129