Lock Of Panel Operation - YASKAWA YWE-EH500-6N0 Instruction Manual

4.2 Settings on Welding Source Panel
4.2.11

Lock Of Panel Operation

"Lock of panel operation" is a function to invalidate the button operation so as not to operate
the button of a front panel of the welding power supply by mistake. The button that can be
operated with the panel operation locked is only a gas check button.
Method of setting "lock of panel operation"
R button is pushed continuousness three times while pushing L button.
Common PRM Select
After the condition is stored, HOLd is displayed.
V
If "HOLd" is displayed, "lock of panel operation" is set.
In the state of "lock of panel operation", only the gas check button can be operated.
HOLd "is displayed when buttons other than the gas check button are pushed, and the button
operation is not accepted.
V A
Wire m/min
Auto Adj.
PRM Select
Auto Adjustment
/Individual
L
Gas
Record
A
4-14
Type
PRM Set
Weld, Type
File No.1
File No.2
R
File No.3
User File Select
Wire m/min Type
HW0480311
HW0480311
Power
Warning
Search
48/129