YASKAWA YWE-EH500-6N0 Instruction Manual page 31

HW0480311
2. Transporting with Using a Crane
When using the crane, be sure to confirm the following points before transporting.
1) Confirme the mass of the welding source by referring to " 1 Basic Specifications
". Select the wire rope suitable for the mass and angle.
2) Use eyebolts for transporting and confirm that the eyebolts are tightened firmly
before transporting.
3) Lift the welding source using the crane after the above confirmation.
3. Transporting with Using a Forklift
Observe the following points to use the forklift for transporting.
1) Confirm availability of safe operations site, and transfer the welding source to the
installing site.
2) After determining the operation site, warnings must be placed on transport path
to prevent accidents.
3) Put the welding source on the transporting pallet and fix firmly to prevent falling
or shifting. Employ a stopper on the casters to fix the welding source.
Over-tightening the cover may cause it to deform.
4) Do not raise the lift excessively.
5) Avoid excessive shock or vibration while transporting since the system consists
of precision component.
6) Transport the welding source at yield speed when using the forklift.
2.9 Precautions on Transporting
2-14
HW0480311
31/129