Implement hitching and unhitching
To hitch an implement to the drawbar, proceed as follows
- Remove lock pin 1
- Remove pin 2
- Reverse the tractor slowly up to the implement
- Insert pin 2
- Insert lock pin 1
Drawbar type Maximum horizontal load Maximum vertical load Rear tyre
T-CD1
6,000 kg
Technically permissible towable masses
Unbraked towable mass
Independently braked towable mass N/A
Inertia-braked towable mass
Tractor identification plate
The tractor serial number is stamped on aluminum plate locates on the LH side of the axle frame.
For general model
1 - A
2 - B
CONTROLS, INSTRUMENTS & OPERATIONS
500 kg-f
1,100 kg
6,000 kg
13.6L - 26 8PR(R1)
17.5L - 24 8PR(R3)
17.5L - 24 6PR(R4)
63
UCL18N041