Engine; Fuel System; Oil System; Cooling System - Zetor UTILIX CL Operator's Manual

Engine

1. Put the engine oil on load after the engine is heated & the water temperature gauge indicates the
needle to be in the green zone.
2. If excessive black smoke is visible, then the paper element of air cleaner, Fuel injection pump or
nozzles should be checked.
3. Do not run the engine without load for more than 2 minutes. It is better to stop the engine rather than
run it idle. This will help in saving of fuel.

Fuel system

1. Always use filtered diesel for the fuel system.
2. At the end of the day's working, it is preferable to fill the diesel tank so that it may prevent
condensation.
3. Change the filter, if the system gets choked. Do not change both the filters at the same time. If the
above directives are not adhered to, the fuel injection pump & injection nozzle will lose its life early.
Also, it will lead to excessive black smoke & excessive diesel consumption

Oil system

1. Always use recommended grade of oil.
2. Everyday before starting the engine, check the oil level with a dipstick & refill between the minimum &
maximum level.
3. Charge the engine oil. Replace filter & ''O'' ring, as & when required.

Cooling system

1. Check the fan belt tension regularly. Adjust, If required.
2. Check the coolant level in the radiator fins always clean.
3. Replace the radiator cap with a genuine cap only, if required.
4. Do not remove the thermostat but replace with a new one, if required.
5. Do not change the radiator water often.
Note:
1) Always stop any fuel or oil leakages.
2) Carry out the regular maintenance failure to do so might increase the fuel consumption by 25%.
3) Carry out the torque of cylinder head bolt & adjustment of valve clearance regularly. Consult your
dealer for this.?
4) Check the tire pressure & inflate, as recommended.
Note:
1) Always buy genuine spares from the authorized dealer / distributor.
2) Always carry out the service of the tractor by your authorized dealer / distributor.
* For any other information, contact your nearest authorized dealer / distributor.
CONTROLS, INSTRUMENTS & OPERATIONS
104