Tight Turns In The Field; Normal Braking And Parking; Uphill Starts On A Steep Slope - Zetor UTILIX CL Operator's Manual

Tight turns in the field

Disconnect the latch connecting left and right brake pedals
to allow the use of individual pedals.
To make a tight turn use both the steering wheel and the
brake pedal at the same time.
For a left turns use the left pedal and a right turn the right
pedal.
Caution:
Perform tight turns only at a slow safe speed.
Doing so at a high speed can cause rollovers and very serious injury or death.

Normal braking and parking

Let the engine come back to idle and at the same time
push in the clutch and brake simultaneously.
When the tractor has come to a halt, lower any implement
to the ground, and put the main gear in neutral.
Apply the park brake, stop the engine, and remove the
key.
Caution:
Always apply the park brake when parking.
Failure to do so can cause accidents and damage.
As an extra precaution when parking on a slope, chock the rear wheels.

Uphill starts on a steep slope

With the pedals connected together push down on the
brake pedals and push down the clutch.
Set all gear levers to low and the throttle to medium
engine speed.
Release the clutch and as it engages release the brake
pedals.
Adjust the throttle to the required speed.
CONTROLS, INSTRUMENTS & OPERATIONS
66
U18N050
UCL18N042
UCL18N043