Table of Contents
Advertisement
8.4
Pushing installation with PULL-arm (Sliding PUSH)
This arm system consists of main arm, slide track, guide shoe and shaft adaptor. It can be fitted
on combinations of doors and jambs (walls), where the wall thickness does not exceed approx.
4 1/2". Dimensions given here correspond to an opening angle of 90-100°.
P/N: 1007251BK, 1007251SI
3 3 / 4" (95 mm)
Note: Limited performance not for windy condition or high stack pressure. Maximum door
weight 265 lbs and width 48".
8.5
Double door installations
There are four different types of double door installations:
Astragal – Has an overlapping master door, can be opened synchronously if it is not jamming
and must be closed asynchronously to avoid that the doors will jam or close in the wrong
order.
Jamming – This door type needs to be opened and closed asynchronously to avoid that the
doors will jam with each other.
Not jamming, not rebated – This door type has doors that always can move independently
of each other and can be opened and closed synchronously.
Double egress – This door type has doors that opens in different directions which can be
opened and closed independently. This door type may have a different way of handling
safety sensors due to the difference in opening direction of the doors.
Also see page 57.
1007718-US-3.0
Max. 4 1 / 2" (114 mm)
8 1 / 4" (210 mm)
Issue 2012-06-27
8 Arm systems
21
Hide quick links:
Advertisement
Table of Contents
