Table of Contents
Advertisement
a Locate the door in closed position.
b Fix the main arm with guide shoe (1) loose onto the operator shaft so that the guide shoe is
just in contact with the door.
c During the opening and closing movement of the door, the guide shoe (1) will move a certain
distance on the door. Mark the end positions for this distance.
Note: The end positions do not always occur when the door is fully closed and fully open.
d Position the slide track (3) symmetrically over the marks on the door, with the centre of the
fixing holes, W+ 2 1/8" (see table on page 38), from the lower edge of the operator. Mark
on the door for the fixing holes. Drill and thread or use rivnuts.
e Attach the slide track (3) to the door with the guide shoe (1) fitted into the track. Use appro-
priate screws.
1
2
3
1007718-US-3.0
Guide shoe
Main arm
Slide track
Issue 2012-06-27
11 Mechanical installation
1
3
2
45
Hide quick links:
Advertisement
Table of Contents
