Prover Calibration; System Information; Figure 2-12: Prover Calibration; Figure 2-13: System Information - Honeywell Enraf Operation Manual

Figure 2-12: Prover Calibration

Figure 2-13: System Information

2-14
Controller Information

2.3.7 Prover Calibration

The menu screens for Prover Calibration are shown in the diagram below
(Figure 2-12). See Chapter 4 for detailed calibration procedures.

2.3.8 System Information

The SVP Controller "About" box is showing important information about:
The Device (SVP Controller)

The individual boards (HMI, SVP and Option)

The firmware versions

Within this screen identification information is shown of the following
device components:
Device serial number

Production date

Serial number of each FlexConn board

Hardware version of each FlexConn board

Application firmware version of each FlexConn board

Build information of the firmware of each FlexConn board

Boot firmware information of the firmware of each FlexConn board

SVP Controller Operation Manual Part No.: 44200004 - Revision 2