Start-Up; Contents Of This Chapter; Start-Up Procedure - ABB ACS880-104 Hardware Manual

Start-up

Contents of this chapter

This chapter contains the start-up procedure of the inverter.
Note:
These instructions do not cover all possible cabinet constructions. Always refer to the
delivery-specific circuit diagrams when proceeding with the start-up.
WARNING!
Only qualified electricians are allowed to do the work described in this chapter.
Read the complete safety instructions and repeat the steps described in section
Electrical safety precautions. The complete safety instructions are given in Safety
instructions for ACS880 multidrive cabinets and modules [3AUA0000102301
(English)]. Ignoring the instructions can cause physical injury or death, or damage
to the equipment.
Note:
The customer is fully responsible for implementing and testing the functional safety circuits
according to the relevant legislation and acceptance testing regulations. The functional
safety option manuals give examples on implementing the safety circuits in ACS880
multidrives. For information on the Safe torque off function, see chapter
off function (page 313).

Start-up procedure

Tasks
Safety
Start-up 169
7
12
The Safe torque