Frames R6I And R7I; Inverter Modules - ABB ACS880-104 Hardware Manual

Frames R6i and R7i

￭

Inverter modules

Deliveries of frame R6i and R7i inverter modules include the following items:
Ordering code
[Module type]
For example,
ACS880-104-0210A-3
[Module type] +C132
For example,
ACS880-104-0210A-3 +C132
ACS880-104-0210A-3 +C132 +F272
[Module type] +F272
For example,
ACS880-104-0210A-3 +F272
[Module type] +N8010
For example,
ACS880-104-0210A-3 +N8010
ACS880-104-0210A-3 +F272 +N8010
For module types, see Ratings.
Note: The following components are also required to construct a working unit and must be
ordered separately:
• An ACS-AP-x control panel is required for the commissioning of an ACS880 drive
system, even if the Drive composer PC tool is used.
• Common mode filters.
The other parts listed in this chapter for these frame sizes
• may be required by the application (such as a DC switch/disconnector), or
• make the installation or use of the module easier.
Contents
• Inverter module with ZCU control unit
• ZMU memory unit with ACS880 primary control program. For avail-
ability of other control programs, contact your local ABB represent-
ative.
• Marine type approval. For more information, see ACS880 +C132
marine type-approved drive modules and module packages supple-
ment (3AXD50000037752 [English]).
• Inverter module with ZCU control unit and internal charging circuit
(note that R7i requires additional external components)
• ZMU memory unit with ACS880 primary control program. For avail-
ability of other control programs, contact your local ABB represent-
ative.
• ACS880 primary control program with application programmability
using function blocks based on the IEC 61131-3 standard. For more
information, see Programming manual: Drive application program-
ming (IEC 61131-3) (3AUA0000127808 [English]).
Ordering information 223