Replacing R8I Module - ABB ACS880-104 Hardware Manual
Industrial drives, inverter modules
Hide thumbs
Also See for ACS880-104:
- Hardware manual (404 pages) ,
- Firmware instructions (664 pages) ,
- Firmware manual (604 pages)
Table of Contents
Advertisement
192 Maintenance
Replacing R8i module
WARNING!
Read the safety instructions given in Safety instructions for ACS880
multidrive cabinets and modules (3AUA0000102301 [English]). If you
ignore them, injury or death, or damage to the equipment can occur.
WARNING!
•
Do not use the module extraction/installation ramp with plinth heights which
exceeds the maximum allowed height.
•
Secure the module extraction/installation ramp carefully.
•
Push the module into the cabinet and pull it from the cabinet carefully preferably
with help from another person. Keep a constant pressure with one foot on the
base of the module to prevent the module from falling on its back. Keep your
fingers away from the edges of the front flange of the module.
max.
•
Be careful when handling a tall module. The module overturns easily because
it is heavy and has a high center of gravity. Whenever possible, secure the
module with chains. Do not leave an unsupported module unattended especially
on a sloping floor.
1. Stop the drive and do the steps in section
you start the work.
2. Open the cubicle door.
3. Remove the shrouds (if any).
Electrical safety precautions (page 144)
before
Advertisement
Table of Contents
