Frames R1I; Inverter Modules - ABB ACS880-104 Hardware Manual

204 Ordering information
Frames R1i...R4i
￭

Inverter modules

As standard, frame R1i to R4i inverter modules come with a cover that also acts as a control
panel holder. The cover is fitted with a panel interface board (ZDPI-01) which enables the
construction of a panel bus. The panel bus makes it possible to control several inverter units
from a single control panel.
The modules can be ordered without the cover by specifying option code +0J414. (If desired,
the panel bus can be constructed using FDPI-02 modules which are available separately.)