Moving And Unpacking The Module; Contents Of This Chapter; Moving And Lifting The Transport Package; Unpacking - ABB ACS880-104 Hardware Manual

Moving and unpacking the module

Contents of this chapter

This chapter gives basic information on moving, unpacking and lifting the modules.
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur.

Moving and lifting the transport package

Move the transport package by a pallet truck or lift. Lift the transport package in horizontal
position. Use soft lifting slings.

Unpacking

￭ Frames R1i...R5i
The module is delivered in a corrugated cardboard box. The module and its parts (such as
grounding/clamp plates, terminal blocks, etc.) are placed in the different compartments of
the box.
1. Remove any banding and lift off the cover of the box.
2. Lift the module out of the box.
3. Check all the compartments in the box for accessories.
Note:
Some parts may be placed in a compartment directly underneath the module.
Dispose of or recycle the packaging according to the local regulations.
Moving and unpacking the module 43
3